Ricerca di personale
Angel Group jobs opportunities.
Se ritiene opportuno può selezionare la/le offerte di suo interesse prima di inviare il suo CV.
Selezionare il campo vuoto nei menù a tendina per visualizzare tutte le opzioni.

Offerte di lavoro


Azienda Sede Area
Selezionare la/le offerte
 Offerte 
 Azienda 
 Sede 
 Rif. Offerte 
 Dettaglio offerta 
  
  Junior Electronic Designer
 SITAEL
 Forlì
 64

Junior Electronic Designer

POSITION MISSION

In the context of the design and development of advanced propulsion systems, instruments and avionics for space applications, SITAEL is looking for candidates for the position of Junior Electronic Designer

Responsibilities 

The junior electronic designer will be part of Space System Department, in the Integrated Avionics team. He/she will be in charge of unit electronics digital/analog design, with specific reference to the satellite on-board power regulation and conditioning. He/she will follow the design starting from the system requirements definitions, up to the detailed schematic design. He/she will also provide support for the embedded SW development and for the definition of the test camping of the unit.

  • Satellite on-board power regulation requirement definition
  • System level analysis (i.e. technical budgets)
  • Analog/digital HW detailed design (i.e. schematic)
  • HW calibration/test
  • Support to embedded SW design for microcontrollers
  • Support to test campaigns
Requirements

Knowledge digital and analogue electronic design
Knowledge of laboratory instruments for HW testing calibration (power supply, oscilloscope, spectrum analyser, multimeter)
Knowledge of embedded software development (C/C++)
Good knowledge of English
- SITAEL FORLI'

2/13/2020 - 12/31/2020

  
  RF Communication System Engineer
 SITAEL
 Forlì
 67

RF Communication System Engineer

POSITION MISSION

In the context of the design and development of advanced propulsion systems, instruments and avionics for space applications, SITAEL is looking for candidates for the position of RF Communication System Engineer.

Responsibilities

The RF Engineer will act at unit, subsystem and system level (satellite-platform level) with responsabilities on HW design, specific embedded SW development and definition of test campaign of on-board telecommunication equipment. The list of equipmentincludes electronic board, RF power amplifier and filter, antenna system, cabling. He will also act as key reference person for Ground Segment HW development and for electromagnetic compatibility analysis and control plan, as well the coordination of frequency request and maintenance for space mission.

  • Definition of telecommunication unit and subsystem requirements;
  • Perform system level analysis (i.e. technical budgets);
  • Coordination of HW development and integration;
  • Coordination of embedded SW development;
  • Support to test campaign;
  • Prepare subsystem level documentation;
  • Definition of Ground Segment requirements;
  • Coordination of EMC analysis at system level;
  • Coordiantion of frequency request;
  • Responsability of RF laboratory instrumentation.
Requirements

Very good knowledge of telecom subsystem design for aerospace application;
Basic knowledge of Satellite Design and its subsystems/functions;
Good knowledge of Matlab Simulink, CST, Software Defined Radio, C language, MS Office, MS VISIO;
Good knowledge of EMC analysis and simulation;
Very good knowledge of laboratory instrumentation for RF application
Capability of perfomring technical coordination
Master's degree in Telecommunication of Electronic Engineering (5y+)
Very good knowledge of English - SITAEL FORLI'

2/13/2020 - 12/31/2020

  
  Propulsion AIT Senior
 SITAEL
 Pisa
 11

Propulsion AIT Senior

Responsabilities

The AIT Engineer will act at unit, subsystem level (Propulsion S/S levels), with supervision responsibility on integration and test activities, as support for operator assembly and integration activities.
AIT engineer defines and specifies MGSE for propulsion S/S, supports AIT manager authority on S/S activities and definition.
The AIT Prop Engineer supports AIT Manager engineer on definition and specification on MGSE.
A mid-level experience (at least 3-5 years) in the field of Space AIT Engineering is required.

Main activities are:

Definition of preliminary and detailed Assembly and Integration Plan;
Specification and Definition of MGSE;
Support the AIT Manager in overall AIT authority tasks;
Supervise propulsion Test activities;
Support Propulsion test setup definition;
Propulsion test procedure preparation;
Technically manage Propulsion Test;
Facilities suitabilitv analysis.

Requirements

It Is Required Master Degree in Aerospace or Mechanical Engineering (5y+);
At least 3-5 years of experience in AIT, ideally AIT engineering at propulsion S/S level;
Good knowledge of testing facilities;
Good knowledge of Space Qualification and Acceptance test campaigns (according to ECSS-E-ST-10-03C);
Very good knowledge of MS Office, CAD Software; Verv good knowledge of English. - Sitael Pisa - Ospedaletto

1/14/2020 - 12/31/2020

  
  Program Manager
 SITAEL
 Pisa
 15

Program Manager

Responsabilities

This resource is in charge of planning the development stages of projects in the aerospace field, ranging from the strategic planning of activities to their implementation and control.
This resource interacts with the various company departments: Management, Technical and Commercial Head Offices, Purchase Department, Production, Quality.
He/She manages relations with customers and suppliers.

Requirements

Degree in Aerospace/Electronic Engineering.
At least 3 years of previous experience in this position.
Experience in Aerospace projects gained from structured and dynamic contexts.
Knowledge of Project Management techniques.
Excellent command of English.
Availability for travelling abroad.
Leadership, management and team coordination skills. - Sitael Pisa - Ospedaletto

1/15/2020 - 12/31/2020

  
  Product Assurance Manager
 SITAEL
 Pisa
 33

Product Assurance Manager

Position mission

In the frame of Product Assurance activities, SITAEL is looking for an experienced Product Assurance Specialist. The Product Assurance Specialist will participate into design reviews and inspections point to ensure that preventive actions are taken account of for known quality issues thus avoiding repetitive problems. He will review Company Standards and propose changes where necessary to update working processes.

Responsabilities

  • Implementation of a Product Assurance plan on project basis.
  • Participation into design reviews and inspections point
  • Ensuring that the quality requirements included within the Project Statement Of Work are taken into account
  • Proactively seek to ensure that preventive actions are taken account of for known quality issues thus avoiding repetitive problems 
  • Negotiating with external Customers and suppliers regarding quality standards/requirements, waivers, deviations, etc.
  • To act where necessary as a single point contact for the resolution of all quality matters and ensure the inputs of Materials Engineering, EEE parts and other specialist disciplines are taken account of.
  • Reviewing Company Standards and proposing changes where necessary to update working processes and to ensure that all equipment documents and drawings are signed by the relevant disciplines before signing and approving them for the configuration Control Board [CCB] to know they have been checked and approved by PA for all quality aspects.
  • To maintain within the project adequate records to ensure that easy reference is available for monitoring past and present procedural or technical problems.
  • To undertake audits which assess whether all quality requirements have been addressed and have been (or planned to be) incorporated into the design solution. Random project/product audits will also be conducted to establish optimization of processes and systems.
  • Support to all disciplines in the creation of suitable, useful metrics, to measure effectiveness and to form a basis of improvement activities.
  • Participating into Non Conformance Review Boards [NRB] and addressing the curative and corrective actions required.
  • To perform other duties as requested by the head of Product Assurance

Requirements

  • Previous experience of minimum 3 years in similar position in the Space industry
  • Knowledge of ISO 9001 and EN 9100 standards
  • Good communication skills, fluent English
  • Knowledge of Product Assurance disciplines for Space application, including M&P, EEE parts, RHA and RAMS
  • Experience on AIT of complex systems will be greatly appreciated
- Sitael Pisa - Ospedaletto

1/29/2020 - 12/31/2020

  
  Magazziniere ed Incoming Inspector
 SITAEL
 Pisa
 45

Magazziniere ed Incoming Inspector

Mission

Gestione delle attività di magazzino ed incoming inspection per la sedi di Ospedaletto e San Piero a Grado.

Responsabilità
  • La risorsa avrà le seguenti principali attività
  • Ingressi e uscite merci;
  • Allocazione merce a magazzino;
  • Registrazione consumi e spostamento materiale fra magazzini/commesse/divisioni; 
  • Registrazione di tutte le attività tramite ERP SAP;
  • Inventario;
  • Incoming inspection delle forniture critiche.
Requisiti
  • Richiesto al minimo diploma di perito tecnico Industriale con specializzazione meccanica; alternativamente una laurea breve nel medesimo indirizzo.
  • Buona conoscenza del pacchetto Office (Excel e Word)
  • Preferibilmente Conoscenza SAP
- Sitael Pisa - Ospedaletto

2/10/2020 - 12/31/2020

  
  Stage Propulsion System Engineer
 SITAEL
 Pisa
 65

Stage Propulsion System Engineer

POSITION MISSION

In the context of the design and development of advanced propulsion systems, instruments and avionics for space applications, SITAEL is looking for candidates for the position of Junior 
Propulsion System Engineer (stage).

Responsibilities 

The system propulsion engineer will participate to the Electrical Propulsion and Chemical Propulsion design and development. He is a major contributor for establishing the equipment selection, the components development and qualification test plan. His contribution also extends to planning and updating assembly, integration, test and verification schemes within the programme (in cooperation with the other systems). 
  • Architecture definition (electric and chemical propulsion systems);
  • Requirements definition and management;
  • Mass and power budgets definition;
  • Definition of DDVP at subsystem level; Interface with commercial and institutional customers and suppliers;
  • Support to PMO for schedule management;      
    Delivery of technical contributions for proposals and reviews.
Requirements

Master Degree in Aerospace Engineering or similar, System Engineering, Fluid Dynamic, Space Propulsion (Electrical & Chemical), SW (ECOSIMPro, Matlab, DOORS).

- Sitael Pisa - Ospedaletto

2/13/2020 - 12/31/2020

  
  Junior Propulsion System Engineer
 SITAEL
 Pisa
 66

Junior Propulsion System Engineer

POSITION MISSION

In the context of the design and development of advanced propulsion systems, instruments and avionics for space applications, SITAEL is looking for candidates for the position of Junior 
Propulsion System Engineer (stage).

Responsibilities 

The system propulsion engineer will participate to the Electrical Propulsion and Chemical Propulsion design and development. He is a major contributor for establishing the equipment selection, the components development and qualification test plan. His contribution also extends to planning and updating assembly, integration, test and verification schemes within the programme (in cooperation with the other systems). 
  • Architecture definition (electric and chemical propulsion systems);
  • Requirements definition and management;
  • Mass and power budgets definition;
  • Definition of DDVP at subsystem level; Interface with commercial and institutional customers and suppliers;
  • Support to PMO for schedule management;      
    Delivery of technical contributions for proposals and reviews.
Requirements

Master Degree in Aerospace Engineering or similar, System Engineering, Fluid Dynamic, Space Propulsion (Electrical & Chemical), SW (ECOSIMPro, Matlab, DOORS), Experience: preferably 2+

- Sitael Pisa - Ospedaletto

2/13/2020 - 12/31/2020

  
  AIT EMC Engineer
 SITAEL
 Mola di Bari
 09

AIT EMC Engineer

Responsabilities

The AIT EMC Engineer will act at unit, subsystem and system level (satellite-platform levels), with responsibilities on electrical, functional and EMC test activities. A mid-level experience (at least 3-5 years) in the field of Space AIT Engineering is required, preferably with a focus either on AIT EMC engineering activities. Experience on Functional test campaign shall be appreciated.

The Main Tasks Will Be:

Specification and Definition of EMC Setup;
Definition of detailed EMC Conducted and radiated Test Procedure;
Support the AIT Manager in overall AIT authority task;
Supervise and Execute EMC Test activities;
Test setup and EGSE definition considering integration steps and Test campaign;
Facilities suitability analysis.

Requirements

Master Degree in Electronic Engineering (5y+);
At least 3-5 years of experience as EMC engineer, ideally for space industry;
Good knowledge of EMC Testing facilities;
Good knowledge of Space Qualification and Acceptance test campaigns (according to ECSS-E-ST-10-03C);
Good knowledge of ECSS-E-ST-20-07C;
Very good knowledge of MS Office, MS Project, MS VISIO;
Very good knowledge of English. - SITAEL Mola di Bari

1/14/2020 - 12/31/2020

  
  AIT SW Engineer
 SITAEL
 Mola di Bari
 10

AIT SW Engineer

Responsabilities

The AIT SW Engineer will act at subsystem and system level (satellite-platform levels), with responsibilities on test Sw design and specification; as responsible of EGSE SW.
A mid-level experience (at least 3-5 years) in the field of Space AIT Engineering is required, preferably with a focus on AIT SW engineering.
Experience on E2E test campaign shall be appreciated.

The Main Tasks Will Be

Specification and Definition of Test SW;
Definition of detailed HW/SW Integration Test Procedure;
Definition of detailed SW Test Procedure; Support the Functional AIT Engineer on EGSE definition;
Support EGSE definition considering integration steps and Test campaign;
Labview, Labview FPGA Development; C, C++ embedded development;
SW verification according to ECSS-Q-ST-80C.

Requirements

It Is Required Master Degree in Computer Engineering/Computer Science (5y+);
Good knowledge of SW Testing;
Basic knowledge of Space Qualification and Acceptance test campaigns (according to ECSS-E-ST-10-03C);
Good knowledge of ECSS-Q-ST-80C;
Very good knowledge of C/C++ programming language;
Good knowledge of Python/Perl Good knowledge of Labview/Labview FPGAGood knowledge of MS Office, MS VISIO;
Very good knowledge of English. - SITAEL Mola di Bari

1/14/2020 - 12/31/2020

  
  Functional Analyst
 SITAEL
 Mola di Bari
 12

Functional Analyst

Responsibilities

Definition of the functional and other requirements for one or more corporate projects
Impact analysis with reference to one or more corporate projects
Design of system tests and functional tests for one or more corporate projects
Design of acceptance tests (UAT)
Customer test support
Formulation of customer needs

Basic Skills Required

Degree in Computer Science, Computer Engineering or equivalent
At least 5 years’ experience as a systems analyst
At least 10 years of overall experience in software development
Availability for travelling to meet customers
Excellent knowledge of technical requirements analyses
Excellent software engineering knowledge
Excellent UML knowledge
Excellent knowledge of the conceptual modeling of databases with ER diagrams
Excellent knowledge of methodologies for functional and system testing
Excellent knowledge of Object Oriented Programming
Strong analytical and problem solving skills

Preferred Skills

Experience in the design of user interface, especially in the mobile field
Concepts of software usability, especially in the mobile field
Experience working with agile methodologies, such as Scrum and Test Driven Development
Experience in Mobile Programming (Android, iOS)
Experience in J2EE backend Technologies - SITAEL Mola di Bari

1/15/2020 - 12/31/2020

  
  Product Manager
 SITAEL
 Mola di Bari
 16

Product Manager

Responsabilities

The Product Manager, reporting directly to the company managers, is in charge of managing the product (of which he/she has a clear and comprehensive vision), starting from the collection of requirements based on market analyses.
He/she is also responsible for establishing marketing plans concerning hardware and software solutions. This resource works in synergy with the sales, marketing and (hardware and software) product development departments in order to coordinate the strategic planning and the development of new business.
He/she backs up the management of the entire cycle of product development in order to achieve the expected results.

The Product Manager Has To

  • monitor and analyse the target market in order to identify new development opportunities;
  • try and keep track of competitive products and market trends;
  • define the product specifications;
  • identify the competitive advantages of the products developed or to be developed verifying their correct implementation;
  • be a guarantor of the quality of products;
  • analyse the market prices and costs of products as oriented to the final consumer or companies;
  • define, with the marketing and sales departments, the product positioning in terms of price and margin;
  • prepare plans for product launch and coordinate the development;
  • manage the entire life cycle of new products and old ones;
  • support the sales team throughout customer visits, proposals and quotes;
  • participate in events and fairs.

Requirements

– Degree in Computer Science or Information Engineering.
– 5+ years of experience in product management of HW and SW solutions.
– Proven experience in managing relationships with customers and analysing their needs.
– Ability to write technical specifications and requirements.
– Excellent communication skills.
– Solid technical/professional experience in the management of both hardware and software products.
– Excellent team work ability.
– Ability to focus on the achievement of objectives.
– Excellent English knowledge. Analysis, organization and leadership skills combined with charisma and independence complete this profile. - SITAEL Mola di Bari

1/15/2020 - 12/31/2020

  
  Software Line Manager
 SITAEL
 Mola di Bari
 21

Software Line Manager

The SW Line Manager will manage people working in the software development line. This line manages both Mobile and Back-End software development. The SW Line Manager will be responsible for knowledge, process and budget management for his own line and will manage the resource allocation to the various company projects.
The SW Line Manager will work predominantly in the Industrial Business Unit, in the Internet of Things (IoT) scope.

The main technologies used by the SW development line are the following:
Java J2EE
Spring
Application server Tomcat, JBoss
DBMS MySql, PostgreSql, Oracle, Couchbase
Message broker Rabbit MQ, Apache Kafka, Mosquitto, EMQX
HTML5, CSS3, Javascript
AngularJS
Web Services RESTful
Kotlin Language
Android SDK
iOS SDK
Swift/Objective C Language
Flutter
Microsoft .Net Core
C# Language
Azure and Amazon AWS clouds

Responsibilities

Definition of line processes, procedures and KPIs
Definition of the line budget
Definition of training plan and recruiting of new resources
Activities estimation and planning
Technical coordination and management of a working group of medium size (15 people)
Training on the job for junior resources
System requirements analysis
Software requirements drafting and review
Detailed design definition and review
Source Code Review

Requirements

Master Degree in Computer Engineering, Electronics engineering, Computer Science or similar
Deep knowledge of Software Engineering methodologies and software development lifecycle
Deep knowledge of the main design patterns (MVC, Factory, State, Observer, …)
Knowledge of UML design language
Strong knowledge of requirements analysis methodologies
Strong knowledge of Object-Oriented programming and design
Strong knowledge of relational database theory and design
Strong knowledge of communication protocols. ISO/OSI stack, HTTP and MQTT protocols
Strong knowledge of SOA and microservices architectures and RESTful and SOAP web services
Deep knowledge of J2EE technologies (EJB, JPA, Spring, Struts, etc…)
Strong knowledge of at least one of the following languages: Java, Swift, Objective C
Strong knowledge of at least one of: Android SDK, iOS SDK
Knowledge of at least one of: Amazon AWS or MS Azure clouds services and APIs
Knowledge of the fundamentals of project management
Good knowledge of English language

Optionals

Distributed architectures
NoSql databases
Business Intelligence
Datawarehouses
Performance/load testing
Microsoft .NET technologies

Soft Skills

Ability to guide and motivate the working group
Ability to work in a group with a strong result orientation
Ability to clearly express his own design choices
Ability to manage his own work and that of others in complete autonomy
Strong analytical and problem solving skills
Ability to propose innovative solutions with a spirit of initiative
Ability to adapt quickly to new technologies and new tools
Ability to negotiate by proposing advantageous solutions for all the parties involved
Ability to work in a dynamic and stressful environment - SITAEL Mola di Bari

1/17/2020 - 12/31/2020

  
  Visual Designer
 SITAEL
 Mola di Bari
 22

Visual Designer

Responsibilities 

Start and maintain processes to insert visual design artifacts into our marketing materials, and software narratives.
Execute design work that elevates the visual narrative and unifies the strategic and partnership initiatives.
Provide a high degree of Visual Design & visualization support for public presentations and events.
Be instrumental in designing for product demonstrations, creating mechanisms to tell the product stories (illustrations, video & motion design) Help create mechanisms to tell visual narratives (via illustrations, video & motion design) Minimum

Requirements

Experience in narrative, conceptual (i.e., crafting stories and building brands), and graphic design (i.e., typography, layout and how it extends across digital).
Experience in managing stakeholders 3-5+ years of experience in visual design, brand design or motion design
Experience in motion-based storytelling
Experience in illustration and icon design
Proven ability in creating aesthetically excellent work
Expert knowledge of visual design tools including Photoshop, Illustrator, InDesign
Expert knowledge of motion design and video editing tools including Premiere, After Effects
Expert knowledge of Web Design with skills on Html e CSS Expert knowledge of the most popular CMS (wordpress, joomla, woocommerce) and customization
Foreign Languages English: good working Knowledge – proficient in read, spoken and written

Ability to work in a fast-paced, ambiguous environment and manage projects with minimal supervision
Develop 3D designs for new products.
Review and enhance 3D designs for existing products
Develop 3D animation for new and existing products
Basics of User Interface experience design
Able to handle with php and most common scripting languages for small customization and integrations - SITAEL Mola di Bari

1/20/2020 - 12/31/2020

  
  Mobile Developer iOS
 SITAEL
 Mola di Bari
 60

Mobile Developer iOS

Mission:
Il Mobile Developer iOS progetta ed implementa applicazioni per device mobile (smartphone, tablet) dotati di Sistema Operativo Apple iOS. I progetti saranno in ambito Internet Of Things (IoT), e riguardano innovativi sistemi che integrano applicazioni mobile, applicazioni di back-end ed hardware, utilizzando protocolli di comunicazione avanzati quali Bluetooth 4.1, MQTT.

Responsabilità:
  • Progettazione di dettaglio di una feature; 
  • Implementazione di feature per applicazioni mobile secondo i requisiti, le linee guida ed in base alla progettazione; 
  • Risoluzione dei bug; 
  • Deploy di applicazioni mobile sugli store, in accordo con le procedure; 
  • Effettuare il merge del codice di un branch su di un altro ramo di codice sorgente, secondo l’apposita procedura.

Requisiti:
  • Laurea in Informatica, Ingegneria Informatica o equivalenti;
  • Solide basi di informatica, con approfondita conoscenza di algoritmi e strutture dati e delle metodologie di progettazione del software; 
  • Ottima conoscenza della programmazione Object Oriented; 
  • Ottima conoscenza della teoria dei database relazionali; 
  • Ottima conoscenza dello stack di protocolli ISO/OSI e del protocollo http; 
  • Ottima conoscenza di uno dei seguenti linguaggi: Java, C#, C++, Swift, Objective C Web Services REST e SOAP Linguaggio Objective C Linguaggio Swift iOS SDK

Requisiti preferenziali:
  • Linguaggi di programmazione: Swift, Objective C iOS SDK Principali design patterns (MVC, Factory, State, etc.)
  • Linguaggio UML Tools di sviluppo multipiattaforma (Cordova, Xamarin etc…)
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  Junior PMO - Internship
 SITAEL
 Mola di Bari
 61

Junior PMO - Internship

Mission:
La risorsa risponderà al PMO supportando la gestione e la supervisione dei progetti e tutte le attività relative al ciclo di vita dei progetti stessi.

Responsabilità:
Gestione del flusso di materiale da clienti e fornitori, Gestione contratti e preparazione documentistica a corredo, Gestione fatturazione e database per il controllo e l’archiviazione delle fatture su commessa.

Requisiti:
Utilizzo SAP per preparazione richieste d’acquisto, monitoraggio magazzino, estrapolazione dati. Ingegneria Gestionale Triennale / Magistrale.
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  UI Designer
 SITAEL
 Mola di Bari
 63

UI Designer

Responsibilities:
  • Design application flows, wireframes and prototypes in order to simplify complex user interactions
  • Design usable and delightful interfaces applying the product’s brand identity
  • Create or improve internal tools in support of sales,after sales and compliance processes
  • Support the user researcher in planning and running user test and user research
  • Give and solicit feedback from other designers in order to continually raise our bar for quality
  • Contribute to high-level strategic direction with the rest of the product team

Requirements:
  • Minimum: BA/BS degree in Design (e.g. interaction, graphic, visual communications, product, industrial, etc),
  • Human-Computer Interaction (HCI), Computer Science (CS) or a related field, or equivalent practical experience
  • Preferred: 3-5+ years of experience in interaction design
  • Ability to generate detailed, interactive prototypes
  • Ability to create elegant visual design with thoughtful composition
  • Ability to communicate complex ideas to the team and stakeholders Expert knowledge of design tools including Adobe XD, Axure, Sketch, Figma and Framer X Experience in working with web standard technologies (HTML, CSS, JS), coding skill is a plus Experience in planning and running usability test is a plus
- SITAEL Mola di Bari

2/12/2020 - 12/31/2020

  
  Functional AIT Operator
 SITAEL
 Mola di Bari
 50

Functional AIT Operator

Mission:
In the frame of Assembly Integration and Test (AIT) activities, SITAEL is looking for AIT Functional Operator. The AIT operator will act at unit, subsystem level and System level, performing execution, integration and test activitie, with supervision and support of AIT Engineering Staff. The AIT Functional Engineer will directly report to Functional AIT Responsible.

Responsibilities:
  • Clean Room: test elettrici su dispositivi Space in accordo a standard ECSS;
  • Procedure e reportistica per le prove effettuate;
  • Test modelli di volo: Test di apparati di volo per sistemi di satellitari.

Requirements:
  • Diploma di perito elettronico/ meccatronico/ elettrico
  • Conoscenza basilare della strumentazione di laboratorio
  • Conoscenza delle leggi basi di fisica (meccanica ed elettrica)
  • Capacità di lettura ed interpretazione di un circuito elettrico
  • Buona conoscenza della lingua inglese Buona conoscenza del pacchetto office
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  Ground Segment System Manager
 SITAEL
 Mola di Bari
 51

Ground Segment System Manager

Mission:
In the frame of Small Satellites Missions, SITAEL is looking for a Ground Segment System Manager, with mid-level experience (3-7 years) in the field of Ground Segment engineering, with focus on GS architectural and SW aspects. The Ground Segment System Manager will report to E2E Systems responsible and to the assigned Project Technical Manager.

Responsibilities:
  • Responsibility of System Engineering task relevant to a complete Ground Segment (SW-HW infrastructures)
  • Responsibility of overall ground segment architecture (both functional and physical)
  • Responsible for the specification-design-validation of ground segment main SW elements (satellite control center, mission-payload control center, flight dynamics, data processing, user catalogue and data dissemination)
  • Repsonsibility for the development of ground segment infrastructures (RF ground stations, mainly in S-band and X-band)
  • Support the Technical Manager in overall system design authority tasks Guarantee the proper interfaces among ground segment elements Perform system level analysis and reporting
  • Manage the main external I/F (Launcher, E2E system, Satellite)
  • Prepare system level documentation (requirements, design description/justification) Requirements management (i.e. DOORS)

Requirements:
  • Aerospace or Telecommunication Engineering (5y+)
  • Master Degree At least 3 years of experience in Ground Segment on Space Projects Good knowledge of Satellite Design and its subsystems/functions
  • Good/Basic knowledge of Space Mission Design & Analysis Capability of performing technical coordination Good knowledge of satellite lifecycle and System Engineering methods and tools (requirement management, tradeoff studies, Sys ML)
  • Very good knowledge of MS Office, MS Project, MS VISIO, DOORS, Matlab Simulink Very good knowledge of English and preferably also French
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  Equipment System Engineer
 SITAEL
 Mola di Bari
 52

Equipment System Engineer

Mission:
In the frame of Small Satellites Missions, SITAEL is looking for a Equipment System Engineer, with experience (10 years) in the field of electronic product design and related circuit analysis. The Equipment System Engineer will report to the Division Responsible.

Responsibilities:
  • Analyse user’s requirements and create a detailed harware architecture and formal structured design;
  • As a technical responsible of equipment design he/she will coordinate, support and verify electronic circuits, systems and equipment designing in the whole product life;
  • Support, correct and verify all the technical documentation provided by the design team;
  • Trade off analysis to meet customer requirements and applicable standards;
  • Support in technical proposal and assist with preparation of quotation, schedules, compliance matrixes and costing for new bids;
  • Produce and manage work packages either internal or subcontracted and submit status reports to Division Responsible;
  • Supervise and support the technical work of junior designers and/or other team members;
  • Support the Division Responsible in preparing material costs and timing estimates, reports and design descriptions for electronic sustem and equipment.

Requirements:
  • About 10 years’ experience in electronic product design and related circuit analysis, including power, digital and analogue building blocks;
  • Bachelor’s degree in Electrical/Computer Engineering or equivalent combination of training and experience;
  • Leadership/management experience;
  • Proven experience working with standards (such as ECSS), processes and work procedures in a structured design environment;
  • Experience in electrical design tools such as Orcad, PSPICE or similar;
  • Microsoft Office (Word, Excel);
  • Excellent analytical, problem solving skills and adaptability;
  • Strong verbal and written communication skills;
  • Fluent in English;
  • Exceptional organization skills and able to meet tight deadlines.
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  E2E System Engineer
 SITAEL
 Mola di Bari
 54

E2E System Engineer

Mission:
In the frame of Small Satellites Design & Development activites, SITAEL is looking for an E2E (End to End) System Engineer, with mid-level experience (2-5 years) in the field of Earth Observation (EO) missions, with a focus on EO applications, services and user data management. The E2E System Engineer will directly report to E2E System Responsible, in the Space Systems Division.

Responsabilities:
  • Engineering activities in the frame of EO applications, as TIR (Thermal Infrared) mission Design and analysis of EO mission at E2E system level EO data processing activities (algorithms, data management, data dissemination)
  • Prepare E2E system level documentation (requirements, design description/justification) Requirements management (i.e. DOORS)
  • Qualifications/Knowledge/Experience Required/Technical Skills

Requirements:
  • At least 2 years of experience in Space Projects, with focus on EO missions/applications
  • Good/Basic knowledge of Space Mission Design & Analysis Capability of performing technical coordination
  • Good knwoledge of satellite lifecycle and System Engineering methods and tools (requirement management, tradeoff studies, Sys ML)
  • Very good knowledge of MS Office, MS Project, MS VISIO, DOORS, Matlab Simulink, C, C++ Very good knowledge of English and preferably also French
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  Optical Payload System Engineer
 SITAEL
 Mola di Bari
 56

Optical Payload System Engineer

Mission:
In the frame of Small Satellites Design & Development activities, SITAEL is looking for a Payload System Engineer in the field of Earth Observation Optical Instruments, with mid-level experience (2-5 years) in the field of Optical Payload Engineering, preferably at system level. The Optical Payload System Engineer will directly report to Space Systems Dept. Manager and to the assigned Project Technical Manager.

Responsibilities:
  • Technical focal point for EO optical payload (missions) in the department Responsibility of optical P/L internal developments (i.e. thermal infrared and PAN-RGB Hi-res instruments);
  • Issue of Payload Technical Specifications (both optical and electronic sections);
  • Issue of Payload Technical Documentation (design, optical sizing-analysis, thermal design, justification, AIV-AIT plans);
  • Technical coordination (follow-up) of Optical Payload providers;
  • Manage the technical interface with E2E system, Satellite and Platform authorities

Requirements:
  • Aerospace or Electronic Engineering (5y+);
  • Master Degree At least 2 years of experience in Optical Payload Engineering, ideally 5 years, with expertise at system level;
  • At least one experience relevant to an Optical Payload development among VIS (PAN-RGB), Hyperspectral, Thermal Infrared instruments/technologies;
  • Good knowledge of Satellite Design and its subsystems/functions;
  • Good knowledge of Space Mission Design & Analysis Capability of performing technical coordination Good knowledge of satellite lifecycle and System Engineering methods and tools (requirement management, tradeoff studies, Sys ML);
  • Very good knowledge of MS Office, MS Project, MS VISIO, DOORS, Matlab Simulink;
  • Very good knowledge of English and preferably also French
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  Sourcing Office - Internship
 SITAEL
 Mola di Bari
 58

Sourcing Office - Internship

Mission:
Expediting – Opera nell’ambito del Sourcing Office, gestendo il processo di expediting degli ordini di acquisto La risorsa, rispondera’ al Responsabile Acquisti.

Responsabilità:
  • Monitora e sollecita l’emissione della conferma d’ordine e la registra nel sistema gestionale;
  • Verifica la coerenza della conferma d’ordine rispetto all’OdA, intervenendo verso il fornitore in caso di difformità; 
  • Monitora la spedizione del materiale e l’arrivo dei materiali in SITAEL, richiedendo al fornitore relativa documentazione (DDT, Tracking number);
  • Informa tempestivamente gli uffici interessati, in caso di criticità nel rispetto delle condizioni previste in ordine o confermate; 
  • Si interfaccia periodicamente con Project Manager e Master Planning, per aggiornamenti in merito allo stato di arrivo dei materiali e relative criticità.

Requisiti: 
  • Diploma in ragioneria, laurea triennale in Ing. Gestionale o Economia,
  • Conoscenza di SAP
  • Ottima conoscenza lingua inglese Ottimo utilizzo Excel
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  Senior Mobile Programmer
 SITAEL
 Mola di Bari
 23

Senior Mobile Programmer

Responsibilities

  • Analysis, design and implementation of mobile applications or evolutionary changes to existing applications, according to the quality standards set at the beginning of the project by the team leader
  • Writing unit tests for each component developed in accordance with the guidelines established at the beginning of the project by the team leader

Basic Skills Required
  • Degree in Computer Science or Computer Engineering or equivalent
  • Solid foundations of information technology, with in-depth knowledge of algorithms and data structures
  • In-depth knowledge of object oriented programming
  • Excellent knowledge of software engineering, software design methodologies and key design patterns (MVC, Factory, etc.)
  • Minimum experience of 5+ years of Android SDK and iOS SDK
  • Knowledge of relational database theory
  • Knowledge of html 5
  • Good problem solving and team working skills
  • Ability to work in a dynamic and very hectic environment
  • Ability to handle multiple tasks with minimum supervision and with full autonomy
  • High flexibility and ability to adapt quickly to new technologies and/or tools

Preferred Skills
  • UML language knowledge
  • Facebook API knowledge
  • Windows Phone SDK knowledge
  • Interface with wireless technologies (Bluetooth, Wi Fi e NFC)


- SITAEL Mola di Bari

1/20/2020 - 12/31/2020

  
  Back-End Programmer
 SITAEL
 Mola di Bari
 24

Back-End Programmer

Responsabilities
  • Architecture design of back-end software
  • Back-end infrastructure sizing
  • Product code performance
  • Estimate of software development time and costs
Requirements
  • Master’s degree in Computer Engineering or equivalent
  • 3+ years experience as a Back-end Programmer
  • Knowledge of sw development methodologies (both waterfall and agile)
  • Knowledge of the main design patterns
  • Knowledge of the 3 tier architectures
  • Excellent knowledge of the http application protocol
  • Knowledge of REST and SOAP web services
  • 3+ years of experience in Java programming within J2EE projects
  • Proven experience in using frameworks, such as Struts, Hibernate, JPA, Spring
  • Excellent knowledge of relational database theory
Preferred Skills
  • Knowledge of distributed architectures
  • Knowledge of the fundamentals of project management
  • Knowledge of the NoSQL database
  • Knowledge of business intelligence tools


- SITAEL Mola di Bari

1/20/2020 - 12/31/2020

  
  Satellite-Platform AIV Manager
 SITAEL
 Mola di Bari
 44

Satellite-Platform AIV Manager

In the frame of Small Satellites Design & Development activites, SITAEL is looking for an experienced AIV (Assembly, Integration & Verification) Manager. The AIV Manager will act at system level (satellite-platform levels), with overall project AIV responsibilities, as coordinator also at lower levels (i.e. subsystems, units). A mid-level experience (at least 3-5 years) in the field of Space System Engineering is required, preferably with a focus on Verification and Validation activities.

The AIV Manager will directly report to Space Systems Division Manager and to the assigned to Project Technical Manager.

Responsabilities:

– Definition of high level (Satellite-Platform) AIV Plan
– Coordination of lower level AIV plans (subsystems and units)
– Support the Technical Manager in overall system design authority tasks
– Establish proper technical and programmatic exchange with AIT Manager
– Guarantee the proper verification approach at all levels (requirement mgmt in DOORS)
– Define the project VCD (Verification Control document)
– Lead the project verification process, through the design, analysis and test phases

Requirements:

– At least 3-5 years of experience in Space Engineering, ideally AIV engineering at satellite level
– Good knowledge of Satellite Design and its subsystems/functions
– Good knowledge of DOORS
– Capability of performing technical coordination
– Good knwoledge of satellite lifecycle and System Engineering methods and tools (requirement management, tradeoff studies, Sys ML)
– Very good knowledge of MS Office, MS Project, MS VISIO, Matlab Simulink
– Very good knowledge of English and preferably also French
- SITAEL Mola di Bari

2/6/2020 - 12/31/2020

  
  Tecnico After Sales II livello
 SITAEL
 Mola di Bari
 46

Tecnico After Sales II livello

Mission:
  • Riparazione in sede e “on site” di prodotti elettronici con l’ausilio di strumentazione elettronica, tools, documentazione tecnica (schemi elettrici, linee guida, troubleshooting) Responsabilità: Redazione report tecnici e troubleshooting
  • Analisi cause guasto Diagnosi in remoto dei guasti sui prodotti oggetto di assistenza
  • Redazione requisiti design fot testability

Requisiti:
  • Conoscenza della strumentazione elettronica di base (oscilloscopio, multimetro, analizzatore di spettro)
  • Comprovata esperienza, almeno quinquennale in attività di ricerca guasti su schede elettroniche Padronanza nell’utilizzo di strumentazione elettronica di base a fini diagnostici (analizzatore di spettro, oscilloscopio, multimetro)
  • Capacità di elaborare report che descrivano in modo chiaro e conciso l’attività tecnica svolta Conoscenza lingua inglese per comprensione e redazione di documenti tecnici Utilizzo pacchetto Office

Requisiti preferenziali:
  • Conoscenza modalità di lavorazione in area EPA
  • Certificazione o conoscenza delle norme IPC A620 e 771-21 per la lavorazione e l’ispezione delle saldature sulle schede elettroniche
  • Conoscenza del linguaggio C per la programmazione di microcontrollori
  • Conoscenza dei principali tool diagnostici in commercio (JTAG)
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  Process Engineer
 SITAEL
 Mola di Bari
 47

Process Engineer

Mission:
The process Engineer operates in the production activities related to electronic boards and equipments for the industrial BU, with the responsibility for the definition of production processes, the relevant cycle times and collaborating with the Supply Manager for the maximization and control of efficiency in manufacturing activities.

Responsibilites:
  • Analyzes the Manufacturing Data Package (MDP) of the Products;
  • Defines the Manufacturing flow chart (MFC) including control plans, verifying the suitability for use in the manufacturing process of documents and equipment reffered by it;
  • Perform analysis of th MDP for estimating the cycle times for the manufacturing of new products, Manages the database of products cycle times;
  • Supports Master Planner and or Project Manager during the reviews with the customers concerning Manufacturing activities, Checks the efficiency of production activities;
  • Records and analyzes deviations between actual times and standard times in order to remove the causes, reports on SCM;
  • It is responsible for maximizing the effectiveness and efficiency in the execution of activities and in the use of the equipments, proposing and supervising the implementation of tools to monitor these parameters, as well as studying and implementing techniques and methods of carrying out activities that reduce time and errors;
  • In the offer phase he defines the time required for the realization of the machine programs, the set-up of the machines and the tac-time of production and testing, moreover he supplies every other element useful for estimating the manufacturing cost;
  • Supports the Manufacturing Manager Industrial (MMI);
  • Identifies suppliers of consumables, machineries and equipments;
  • Is involved in solving problems that arise during production and supports the Product Assurance for the analysis of Non-conformities;
  • Provides support for troubleshooting activities on deffective products;
  • Starts the procurement, in coordination with the Sourcing Office, of screen printing frames and equipments necessary for production, in a time frame compatible with the production plan; Collaborates with people who in charge of defining machinery maintenance plans, aimed at preserving the effectiveness and efficiency of the equipments and to reduce the risk of blocking the production line;
  • Supervises the execution of these plans and reports to SCM on the state of maintenance of machines and equipment, and on risks connected to maintaining the state of effectiveness and efficiency of the production equipments;
  • Defines, in coordination with PCB Design, the paneling of printed circuit boards with the goal of optimizing assembly times;
  • Supports design team in the selection of components and Design For Manufacturing (DFM) activities; Prepares a prototyping report for each new products introduced in the production and shares relevant information with the design team in order to improve product;
  • Coordinates the New Product Introduction (NPI) phase, both for in-house manufacturing and for manufacturing activities executed in other plants, located in Italy or abroad;
  • Is actively involved, in cooperation with Product Assurance, during the First Article Inspection (FAI) ativities, and collects reports related to FAI;
  • Supports SCM, Sourcing Office in the slection of EMS suppliers, in the definition of related RFQs and provides technical support in the interface with the supplier;
  • Supports Quality for the qualification phase of EMS suppliers, taking part at supplier audits.

Requirements:
  • Bachelor or Master Degree in Electronic Engineer;
  • Proven experience in similar role within companies involved in the manufacturing of electronic boards and equipments.
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020

  
  Software Embedded Line Manager
 SITAEL
 Mola di Bari
 48

Software Embedded Line Manager

Mission:
Il Line Manager SW Embedded è responsabile del coordinamento tecnico dell’intero team di sviluppo del software embedded. Ha forti competenze ed esperienza nella progettazione e sviluppo di software. Le aree di mercato di interesse sono Internet of things (IoT) e Railways (diagnostica e segnalazione)

Responsabilità:
  • Definisce processi, procedure e KPI di progettazione SW;
  • Definisce il budget associato al team di sviluppo del software incorporato;
  • È responsabile per i piani di formazione delle risorse e la selezione delle risorse;
  • Coordina una squadra di medie dimensioni;
  • Stima e pianificazione delle attività Formazione di risorse meno esperte;
  • Analizza i requisiti di sistema;
  • Definisce i requisiti del software;
  • Definisce l’architettura del software;
  • Definisce la progettazione dettagliata del software Sviluppo software e debugging del codice sorgente

Requisiti:
  • Laurea magistrale in ingegneria elettronica o ingegneria informatica; 
  • Pianificazione delle risorse e abilità di stima delle attività;
  • Abilità di mentoring;
  • Conoscenza dei linguaggi di programmazione / modellazione (C, C ++, UML);
  • Identificare architetture software manutenibili, scalabili e riutilizzabili;
  • Analisi orientata agli oggetti, capacità di progettazione e sviluppo Conoscenza delle principali strutture dati (ad esempio matrice, coda, elenco, stack, tabella hash); 
  • Conoscenza dei principali algoritmi di ricerca e ordinamento;
  • Conoscenza dello stack ISO / OSI e dei principali protocolli di comunicazione (g. TCP / IP, UDP, HTTP, FTP, MQTT); 
  • Conoscenza dei sistemi operativi integrati (ad es. FreeRTOS, VxWorks, ThreadX);
  • Conoscenza del ciclo di vita del software;
  • Conoscenza degli strumenti di gestione della configurazione (ad esempio GIT, CVS, SVN); 
  • Conoscenza degli strumenti di rilevamento dei problemi (ad esempio Mantis, Redmine, Bugzilla);
  •  Conoscenza degli strumenti di analisi statica (ad esempio SonarQube, Cppcheck, Lint); 
  • Conoscenza delle metodologie di test (ad esempio test di sistema, test di integrazione HW / SW, test unitario) Conoscenza del ciclo di vita del software critico per la sicurezza nelle applicazioni ferroviarie (CENELEC EN 50128)
  • Inglese scritto e parlato – Almeno B1

Requisiti preferenziali: 
Esperienza nella programmazione simultanea (multi-tasking, code, mutex, eventi) Esperienza nello sviluppo di software su PC (Windows o Linux) Esperienza nello sviluppo di software su microcontrollori Esperienza nello sviluppo di driver e periferiche software
- SITAEL Mola di Bari

2/10/2020 - 12/31/2020